Opel Astra A

1991-1998 of release

Repair and operation of the car



Opel Astra A
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. SOHC engines
   + 3.2. DOHC engines
   - 3.3. Diesel engines
      3.3.1. Gear belt
      3.3.2. The 1,7 l diesel engine with a turbo-supercharging
      3.3.3. Tension of a gear belt
      3.3.4. The diesel TC4EE1 engine of 1,7 l with a turbo-supercharging
      3.3.5. Head of the block of cylinders
      3.3.6. The diesel TC4EE1 engine with a turbo-supercharging
      3.3.7. Check of a head of the block of cylinders and the block of cylinders on straightforwardness
      3.3.8. Camshaft
      3.3.9. Gas distribution phases
      3.3.10. Camshaft case cover oil separator
      3.3.11. Check and adjustment of gaps in the drive of valves
      3.3.12. Removal and installation of valves
      3.3.13. Replacement of oil scraper caps
      3.3.14. Grinding of valves
      3.3.15. Grinding in of valves
      3.3.16. Check of a gap in the directing plugs of valves
      3.3.17. Check of the directing plugs of valves
      3.3.18. Check of a compression
      3.3.19. Wedge-shaped belt
      3.3.20. Oil case
      3.3.21. Oil pump
      3.3.22. Safety valve
      3.3.23. Thermostat
      3.3.24. Check of kalilny candles
      3.3.25. Check of system of preliminary heating
      3.3.26. Removal of air from fuel system
      3.3.27. Check and adjustment of turns of idling
      3.3.28. Removal and installation of nozzles
      3.3.29. Check of an advancing of injection of fuel
      3.3.30. Heating of the fuel filter
      3.3.31. Replacement of the filtering element of the air filter
      3.3.32. Discharge of water from the fuel filter
      + 3.3.33. Useful tips
   + 3.4. Engine electric equipment
+ 4. Ventilation and heating
+ 5. Power supply system
+ 6. System of decrease in toxicity
+ 7. Coupling
+ 8. Transmissions
+ 9. Half shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Electrical circuitries


0a910c3c




3.3.31. Replacement of the filtering element of the air filter

PERFORMANCE ORDER
1. The paper filter is subject to replacement through each 30 000 km of a run. At strong pollution the filter needs to be cleared or replaced.
2. Disconnect the hose going to an inlet collector from the filter.
3. To open the tape holder on the filter case.
4. To pull the filter case forward and to take out up the filtering element.
5. To close an inlet opening pure not fleecy rags. To carefully wipe the filter case from within and outside.
6. For cleaning of the filtering element it is careful to knock with it on a firm surface the dirty party down. Establish the cleared or new element, previously having taken out rags from an inlet opening.

Prevention

Not to moisten the filtering element with gasoline or oil.


7. Fix a forward part of the filter by the tape holder.
8. Connect a hose.
On the homepage