Opel Astra A

1991-1998 of release

Repair and operation of the car



Opel Astra A
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. SOHC engines
   + 3.2. DOHC engines
   - 3.3. Diesel engines
      3.3.1. Gear belt
      3.3.2. The 1,7 l diesel engine with a turbo-supercharging
      3.3.3. Tension of a gear belt
      3.3.4. The diesel TC4EE1 engine of 1,7 l with a turbo-supercharging
      3.3.5. Head of the block of cylinders
      3.3.6. The diesel TC4EE1 engine with a turbo-supercharging
      3.3.7. Check of a head of the block of cylinders and the block of cylinders on straightforwardness
      3.3.8. Camshaft
      3.3.9. Gas distribution phases
      3.3.10. Camshaft case cover oil separator
      3.3.11. Check and adjustment of gaps in the drive of valves
      3.3.12. Removal and installation of valves
      3.3.13. Replacement of oil scraper caps
      3.3.14. Grinding of valves
      3.3.15. Grinding in of valves
      3.3.16. Check of a gap in the directing plugs of valves
      3.3.17. Check of the directing plugs of valves
      3.3.18. Check of a compression
      3.3.19. Wedge-shaped belt
      3.3.20. Oil case
      3.3.21. Oil pump
      3.3.22. Safety valve
      3.3.23. Thermostat
      3.3.24. Check of kalilny candles
      3.3.25. Check of system of preliminary heating
      3.3.26. Removal of air from fuel system
      3.3.27. Check and adjustment of turns of idling
      3.3.28. Removal and installation of nozzles
      3.3.29. Check of an advancing of injection of fuel
      3.3.30. Heating of the fuel filter
      3.3.31. Replacement of the filtering element of the air filter
      3.3.32. Discharge of water from the fuel filter
      + 3.3.33. Useful tips
   + 3.4. Engine electric equipment
+ 4. Ventilation and heating
+ 5. Power supply system
+ 6. System of decrease in toxicity
+ 7. Coupling
+ 8. Transmissions
+ 9. Half shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Electrical circuitries


0a910c3c




3.3.25. Check of system of preliminary heating

GENERAL INFORMATION

Malfunction of kalilny candles
Duration of a blinking of a control lamp
Blinking frequency
Beginning of a signal
Obgoraniye of tips
1 minute
1 Hz
in 1 min. after inclusion of ignition
Sticking of contacts
continuous
4 Hz
after start of the engine
Wire breakage
1 minute
4 Hz
after inclusion of ignition
Big current
1 minute
1 Hz
at once at detection

The system of preliminary heating carries out constant self-checking and issues information on the arising malfunctions of kalilny candles in the form of a blinking of the corresponding control lamp on the dashboard. On the frequency of a blinking and its duration it is possible to establish a malfunction source.

At an obgoraniye of tips kalilny candles should be replaced new.

When sticking contacts to replace the relay.

At break of a wire to check presence of tension by means of electric circuits. If tension to eat, check serviceability of the relay.

Malfunction "big current" demonstrates short circuit in the electrical circuitry of the device of preliminary heating. Check presence of tension.

On the homepage