Opel Astra A

1991-1998 of release

Repair and operation of the car



Opel Astra A
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. SOHC engines
   - 3.2. DOHC engines
      3.2.1. Technical characteristics
      3.2.2. Covers of a gas-distributing belt (X 16 XEL)
      3.2.3. Covers of a gas-distributing belt (all models, except X 16 XEL)
      3.2.4. Gas-distributing belt (X 16 XEL)
      3.2.5. A gas-distributing belt (all models, except X 16 XEL)
      3.2.6. Cover of a head of cylinders
      3.2.7. Asterisks of camshafts (X 16 XEL)
      3.2.8. Asterisks of camshafts (all models, except X 16 XEL)
      3.2.9. Camshaft epiploons
      3.2.10. Natyazhitel of a gas-distributing belt and intermediate pulley
      3.2.11. Camshafts
      3.2.12. Head of cylinders (X 16 XEL)
      3.2.13. A head of cylinders (all models, except X 16 XEL)
      3.2.14. Head of cylinders
      3.2.15. Hydraulic elevators of valves
      3.2.16. Oil pallet (X 16 XEL)
      3.2.17. Asterisk of a bent shaft
      3.2.18. Oil pump
      3.2.19. Epiploons of a bent shaft
      3.2.20. Engine and transmission
      3.2.21. Oil cooler
   + 3.3. Diesel engines
   + 3.4. Engine electric equipment
+ 4. Ventilation and heating
+ 5. Power supply system
+ 6. System of decrease in toxicity
+ 7. Coupling
+ 8. Transmissions
+ 9. Half shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Electrical circuitries


0a910c3c




3.2.9. Camshaft epiploons

BACK EPIPLOON

In DOHC engines the back epiploon is not established, and ring consolidation in a back part of the distributor of ignition is established. For replacement of ring consolidation remove the distributor, get old consolidation and establish new.

FORWARD EPIPLOONS

Removal and installation
PERFORMANCE ORDER
1. Remove a camshaft asterisk.
2. Punch or drill an opening in an epiploon.
3. Screw in a screw in an opening and take an epiploon, having pulled for a screw head
4. Clean an epiploon groove.
5. Turn a shaft so that the adjusting pin of an asterisk settled down from above. Grease a new epiploon and hammer it into place.
6. Establish an asterisk.


On the homepage